IndustrialDehumidifierSCA 6000
When energy use and precise temperature / humidity control are all factors in your application, the SCA6000 is a package that satisfies your warm weather requirements. Food, pharmaceuticals, specialty manufacturing, even industrial paint shops, all require tight controls on temperature and humidity. Commercial buildings such as museums, hospitals and even schools have specified humidity and temperature requirements.
The Subcooled Air SCA6000 is a complete warm weather climate control package. Air supplied to the unit is cooled to 40 degrees Fahrenheit to dry the air. If desired, the air can then be heated by up to 50 degrees Fahrenheit before being delivered to the work space. Supply air is thermostatically controlled for both temperature and dewpoint. A high static blower delivers air through up to 500 feet of duct. Electric power savings can easily be 50% when compared to desiccant dehumidifiers. Moisture removal is twice that of desiccant dehumidifiers when inlet air is hot and humid.
Cold, dry air can be heated to 90 degrees Fahrenheit with a condenser reheat coil. Typical air conditioners use power hungry electric heat strips. Condenser reheat provides warm, dry air without the power cost of electric heaters. Electric savings compared to a 50kW electric heater is over $200.00 per day.
The Subcooled 6000 is a complete warm weather climate control package.
Specifications
| PS30: 6,000 cfm, 30 ton | Portable Industrial Dehumidifier w/ Condenser Reheat |
|---|---|
| Dimensions: | 7′ 4″ W x 7′ 10″ L x 8′ 4″ H |
| Weight: | 5000 pounds |
| Main Disconnect: | 100 amps |
| Power Supply: | 460 Volt, 60 Hz, 3 phase |
| Full Load Amperage: | 79.7 amps |
| Minimum Circuit Ampacity: | 86.4 amps; #2 AWG minimum power cable |
| Maximum Overcurrent Protection: | 113.3 amps |
| Generator Requirements: | 80KW, 480 volt |
| Supply Air Blower: | 6,000 cfm @ 2.0″ leaving static pressure; 4,500 cfm @ 5.0″ leaving static pressure |
|---|---|
| Adjustable Supply Air : | 4,000 to 6,000cfm VFD dial controller |
| Duct Connection: | 2 – 16″ diameter ducts |
| Filter Size: | 6 – 20″H x 20″ W x 2″ deep |
| Temperature Drop: | 30 to 50ºF |
| Refrigeration: 2-15 ton, R-410a, scroll | compressors |
| Condenser Reheat: | up to 35⁰F free reheat for cooler weather applications |
| Lifting Options: | fork lift pockets in base and rated four point overhead lifting lugs |
Features
Air supplied to the unit is cooled to 40 degrees Fahrenheit to dry the air
Supply air is thermostatically controlled for both temperature and dewpoint
Cold, dry air can be heated to 90 degrees Fahrenheit with a condenser reheat coil
Electric savings compared to a 50kW electric heater is over $200.00 per day
Warranty
Limited Warranty:
One year warranty on any defective parts.
Limitation of Liability:
To the extent allowable under applicable law, Subcooled Air’s liability for consequential and incidental damages is expressly disclaimed. Subcooled Air’s liability in all events is limited to and shall not exceed the cost of repair.
