Industrial DehumidifierSCA 7000
When energy use, temperature control and humidity control are factors in your application, the SCA7000 is a package that satisfies your warm weather requirements. Food, pharmaceuticals, specialty manufacturing, even industrial paint shops, all require tight controls on temperature and humidity. Commercial buildings such as museums, hospitals and even schools have specified humidity and temperature requirements.
The Subcooled Air SCA7000 Industrial Dehumidifier is a complete warm weather climate control package. Air supplied to the unit is cooled 40 degrees Fahrenheit to dry the air. If desired, the air can then be heated by 40 to 50 degrees Fahrenheit before being delivered to the work space. Supply air is controlled for both temperature and relative humidity. A high static blower delivers air through up to 500 feet of duct. Electric power savings can easily be 50% when compared to desiccant dehumidifiers. Moisture removal is twice that of desiccant dehumidifiers when inlet air is hot and humid.
Cold, dry air can now be heated to the 85 to 90 degree Fahrenheit range with condenser reheat. Typical air conditioners use power hungry electric heat strips. Condenser reheat provides warm, dry air without the power cost of electric heaters. Generator diesel fuel savings compared to using a 90kW electric heater is over $500.00 per day.
The Subcooled Air SCA7000 is a complete warm weather climate control package.
Specifications
| F40: 7,000 cfm | Portable Industrial Mechanical Dehumidifier |
|---|---|
| Dimensions: | 7’ 10″ W x 8’ 10″ L x 8’ 4″ H |
| Weight: | 5500 pounds |
| Main Disconnect: | 100 amps |
| Power Supply: | 460 Volt, 60 Hz, 3 phase |
| Full Load Amperage: | 96.4 amps @ 460 volts |
| Minimum Circuit Ampacity: | 100.9 amps; #1 AWG minimum cable |
| Maximum Overcurrent Protection: | 118.8 amps |
| Generator Requirements: | 100KW,480 volt |
| Supply Air Blower: | 7,000 cfm @ 1.0″ leaving static pressure; 6,000cfm @ 5.0″ leaving static pressure |
|---|---|
| Duct Connection: | 2 – 16″ diameter ducts |
| Filter Size: | 6 – 20″H x 20″ W x 2″ deep |
| Temperature Drop: | 35 to 45ºF |
| Optional Heat: | condenser reheat, 40⁰F rise or 70kW electric strips |
| Refrigeration: | 4– 10 ton, R-410a, scroll compressors |
| Lifting Options: | fork lift pockets in base and four point overhead lifting lugs |
Features
Air supplied to the Subcooled SCA 7000 Industrial Dehumidifier is cooled 40 degrees Fahrenheit to dry the air
Supply air is controlled for both temperature and relative humidity
Moisture removal is twice that of desiccant dehumidifiers when inlet air is hot and humid
Generator diesel fuel savings compared to using a 90kW electric heater is over $500.00 per day
Warranty
Limited Warranty:
One year warranty on any defective parts.
Limitation of Liability:
To the extent allowable under applicable law, Subcooled Air’s liability for consequential and incidental damages is expressly disclaimed. Subcooled Air’s liability in all events is limited to and shall not exceed the cost of repair.
