Commercial AC 15 Ton
At a width of less than four feet, this unit provides portable spot cooling with industrial performance. Portability and performance are the driving forces behind the 15 ton air conditioner. If access to a space is limited and cooling must be provided, this equipment will accomplish the task. Optional casters allow the unit to be rolled through most hallways or transported in freight elevators to project location.
Targeted or "spot cooling" on problem areas or equipment can solve temporary or seasonal temperature issues.
Hot air is cooled 30 to 40 degrees F, providing both cold and dry air to the project. Cold air absorbs both heat and moisture, providing more comfort and lower humidity to workers and sensitive equipment. Clothes and skin stays dry even when space temperature is only cooled to the 80 degree range. This provides a great sense of comfort for workers and utilizes less energy than cooling to the usual 70 degree range with standard air conditioners. The Subcooled Air 15 ton air conditioner is at home in high-rise construction projects, as well as the tight space constraints found in shipyards, refineries and many industrial settings.
Summer heat and humidity can cause seasonal environmental issues to manufacturing, food preparation and product storage. An infusion of fully conditioned outside air or return air can alleviate these problems. Clumping powders and half-dry product are no longer an issue when cold, dry Subcooled Air is added to the normal air stream. Subcooled Air equipment provides better drying of hot, humid air than desiccant dehumidifiers and uses less than half of the energy to do the job. There is also the added benefit of cooling that desiccants can't provide.
|ME15: 2,000 cfm, 15 ton||Portable Industrial Air Conditioner|
|Dimensions:||3' 9" W x 7' 8" L x 7' 7" H|
|Full Load Amperage:||35 amps at 460 volts|
|Power Supply:||460 Volt, 60 Hertz, 3 phase|
|Main Disconnect:||40 amps|
|Generator Requirements:||40KW, 480 volt|
|Supply Air Blower:||2,000 cfm @ 1.0" leaving static pressure; 1,500 cfm @ 3.0" leaving static pressure|
|Refrigeration:||15 ton, R-410a, scroll compressor|
|Duct Connection:||1 -12" diameter duct|
|Filter Size:||2 - 14"H x 25" W x 2" deep|
|Lifting Options:||fork lift pockets in base|
|Supply Air Temperature:||40 to 50ºF|
|15 ton A/C Datasheet||Download PDF|
All information contain herewithin is approximate and is subject to revision by Subcooled Air, L.P. Please contact firstname.lastname@example.org for further equipment information regarding your project.